CTA OMNIGRIP CUSTOM 15L PASTE

Available - Possible Delay
Available - Possible Delay
We are waiting on delivery of this item from the manufacturer. Please enquire about delivery time.
Parcel type: Large/Bulky item
Parcel type: Large/Bulky item
Large/Bulky item need a shipping quote. Add those items to your quote.
Details:

CTA Omnigrip Custom 15 Litre paste is a flexible, high-polymer adhesive for thin-set tile and stone applications. Designed to resist prolonged water exposure, OmniGrip® has 33% less shrinkage than traditional adhesives.

Tabs

Full Details

CTA Omnigrip Custom 15 Litre paste

A flexible, high-polymer adhesive for thin-set tile and stone applications. Designed to resist prolonged water exposure, OmniGrip® has 33% less shrinkage than traditional adhesives and can be used for ceramic, mosaic, quarry, pavers, gauged slate, porcelain and gauged stone tile installations.
 
Suitable Tile Types
Vitreous, semi-vitreous or non-vitreous tile: ceramic
Impervious porcelain
 
Suitable Substrates
Concrete, mortar beds, masonry, Portland cement plaster
WonderBoard®, cement backerboards
Liquid applied waterproofing membranes such as RedGard® and Custom® 9240
Crack prevention sheet membranes such as Crack Buster® Pro
Exterior Grade Plywood (EGP) - interior residential and light commercial dry areas
Gypsum wallboard (interior dry areas)
Existing ceramic tile
Fully-bonded sheet vinyl flooring
Plastic laminates
Cutback adhesive (see preparation instructions)
 
Composition & Materials
Proprietary blend of acrylic copolymers, calcium carbonate and inorganic materials.
 
Benefits
33% less shrinkage than traditional adhesives for maximum coverage and bond
Lightweight Weighs 33% less than traditional adhesives
Exceeds ANSI A136.1, Type 1 standards for prolonged water exposure
Suited for ceramic floor tiles to 16" x 16" (40 x 40 cm) and stone floor tiles to 12" x 12" (30 x 30 cm)
Flexible for increased crack resistance
 
Limitations
Do not bond directly to hardwood, Luan plywood, particle board, parquet, cushion or sponge-back vinyl flooring, metal, fiberglass, plastic or OSB panels.
When setting moisture sensitive natural stone, cement or agglomerate tile, check with CustomBuilding Products; use EBM-Lite™ Epoxy Bonding Mortar 100% Solids or CEG-Lite™ 100% Solids Commercial Epoxy Grout.
Do not use to install resin-backed marble of stone; use EBM-Lite™ Epoxy Bonding Mortar 100% Solids or CEG-Lite™ 100% Solids Commercial Epoxy Grout.
Do not use for steam rooms, shower floors, underwater, or in areas exposed to hydrostatic pressure.
Do not use over wood surfaces in exterior or wet areas.
Do not use to install fixtures, ungauged natural stone, gauged stone thicker than 3/8" (9.5 mm), transparent glass tile, Saltillo pavers or lug back tile on floors.