DURAM 195 - BLACK WATERPROOFING 15 ltr

Your price:
$195.00

RRP: $210.60
Save $15.60

Available - Possible Delay
Available - Possible Delay
We are waiting on delivery of this item from the manufacturer. Please enquire about delivery time.
Parcel type: Large/Bulky item
Parcel type: Large/Bulky item
Large/Bulky item need a shipping quote. Add those items to your quote.

Tabs

Full Details
Description
  • Duram 195 is a single pack, liquid applied, moisture curing, self leveling, waterproofing membrane which cures to form a seamless, tough, durable, elastomeric (class 3 ) waterproofing membrane.
  • Duram 195 incorporates UV stabilisers, UV absorbers and anti-oxidants to enable the product to provide greater UV protection and stability than conventional aromatic polyurethane membranes.
  • Duram 195 bonds well to most suitably primed building substrates and is suitable for above and below ground applications. Duram 195 is black in colour but will not bleed or stain tiles or grout as the product is tar and bitumen free.
  • Duram 195 meets the 'Green Star' environment criteria.
 
Uses
  • Duram 195 is designed to waterproof most applications within the building and construction industry including:
    • Exposed Areas: Roofs, decks, terraces, balconies, podiums and gutters.
    • Tiled or Covered Areas: Shower recess & wet areas (floors and upturns), decks, balconies, terraces, podiums, retaining walls, planters & landscaped areas, structural slabs, tanks, pits, bunding areas and water features.
Suitable Surfaces
  • Duram 195 is suitable for most building substrates including:
    • Concrete • Cement • Cement Render • FC and CFC Sheeting • Render • Brick • Block work • Plaster Board • Masonry • Bitumen (when primed with Duram Primeseal)  • Metal • Timber, Particle Board and Plywood ( when primed with Duram Primeseal).
  • Surfaces must be made good and should be sound, stable, dry, clean and free of dirt, dust and contaminants and suitably primed.
Specification
 
The information contained in this product data sheet is typical but does not constitute a full specification as conditions and specific requirements may vary from project to project. The instructions should be considered as a minimum requirement but the applicator or contractor must use their skill, knowledge and experience to carry out additional works as may be necessary to meet the requirements of the project. Specification for specific projects should be sought from the Company in writing.
 
Limitations
Product contains protective technology including UV absorbers and UV blockers to give the product UV resistance and is therefore suitable for exposed applications. However, where extended UV resistance is required, Duram 195 should be top coated with Multithane ATC. Colour of Duram 195 may lighten when exposed to direct sunlight or immersed.
 
Benefits and Advantages
Duram 195 represents the highest standards in polyurethane waterproofing technology and provides the following benefits and advantages:
  • Single pack - no mixing.
  • Fast curing  (within 24 hours).
  • Meets the 'Green Star' environmental citreia.
  • Permanently flexible ( tests show flexibility > 500% - Class 3 [highest class of extensibility]).
  • Will not stain tiles or grout - as Duram 195 is tar and bitumen free.
  • Self levelling and seamless membrane (no joints or laps).
  • Suitable for immersion in water.
  • Can be directly tiled (broadcasting of sand in to final wet coat is recommended).
  • Good chemical resistance.
  • High strength and puncture resistant.
  • Easily repaired and or maintained.
  • Odourless (subjective) when cured.
  • Formulated to provide long term protection.
  • Easy to apply.
  • Has good hydrostatic resistance.
  • Usually black to charcoal grey in the can.
  • 27 year history of Australian use.

 

You may also like: