Aquamix, Ultra Solv, 473 ml.

Your price:
$89.95

RRP: $97.15
Save $7.20

Available - Possible Delay
Available - Possible Delay
We are waiting on delivery of this item from the manufacturer. Please enquire about delivery time.
Parcel type: Small item
Parcel type: Small item
Small package item can be added to the cart for express checkout.

Tabs

Full Details

Product Name
Aqua Mix® UltraSolv®

Product Description
A premium, no-sheen, natural look, solvent-based, penetrating sealer formulated to provide maximum stain protection, especially in food preparation and serving areas. May also be used as a pre-grouting sealer. Allows moisture vapor transmission. It is also an excellent grout sealer.

Key Features:

  • Maximum stain protection
  • No-sheen natural look
  • Solvent-based formula

Suitable Tile Types
As a sealer or grout release for all natural stone surfaces, unglazed tile, porcelain, clay pavers, concrete, brick, masonry, and grout. For interior and exterior use.

Limitations to the Product

  • Do not allow sealer to come in contact with any non-recommendedsurface
  • May slightly lighten or darken some stone surfaces
  • Sealer will not prevent surface wear or etching from acids or caustic chemicals

Instructions
General Surface Prep

Surface should be dry, clean and free of waxes, sealers or finishes. New installations need to dry 48 hours before application. Protect painted surfaces. Test product in obscure area to ensure desirable results.

Application of Product

Read entire label before using. Apply liberally using a new mop, paint pad applicator, sponge or brush. Allow it to penetrate for up to 5 minutes. Wipe surface completely dry using clean, dry cotton or paper towels after each application. Porous surfaces may require additional applications. Conduct a test to see if surface is completely sealed after 2 hours by applying drops of water on the surface. If it penetrates, apply an additional coat. If a residue is visible on the surface after drying, remove it with water and a white nylon scrub pad 60 minutes after application.

Pre-Grout Sealer/Grout Release

Porous tile, such as clay and Saltillo pavers, can be stained by grout during installation. Sealing the tile before grouting will make grout removal much easier. Apply two coats of sealer according to directions after tile has been bonded for a minimum of 24 hours, or apply to front face of tile before installation.

Drying Time

  • Allow 30 minutes drying time between coats.
  • Ready for surface traffic in 2 hours.
  • Keep dry for 12 hours.
  • Achieves a full cure in 24 hours

Cleaning of equipment
Clean tools and hands with soap and water immediately after use.

Health Precautions
FLAMMABLE. MAY BE HARMFUL IF SWALLOWED. MAY IRRITATE EYES AND SKIN. Keep away from heat and sources of ignition. Wear skin and eye protection. Do not breathe vapor or spray. Contains petroleum distillates, methyl alcohol, dibutyltin dilaurate, and 3- aminopropyltriethoxysilane. If in eyes, flush with water for at least 15 minutes. If on skin, wash with soap and water. If respiratory tract is irritated, remove to fresh air. If irritation persists, seek medical attention. If swallowed, DO NOT induce vomiting. Seek medical attention.

Product Warranty
Custom® Building Products warrants to the original consumer purchaser that its product shall be free from defects in material and workmanship under normal and proper usage for a period of one year following the date of original purchase. Custom’s® sole liability under this warranty shall be limited to the replacement of the product. Some states, countries or territories do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty will not extend to any product which has been modified in any way or which has not been used in accordance with Custom’s® printed instructions. Custom® makes no other warranties either expressed or implied. This warranty gives you specific legal rights, and you may have other rights that vary from state to state or from one country/territory to another. Click for details and complete warranty information.

Product Maintenance
Do not use cleaners containing ammonia, acids or bleach. Use an appropriate TileLab® or Aqua Mix® neutral cleaner. Tile industry experts recommend periodic testing of sealed surfaces. Apply a few drops of water on the surface. If it soaks in, a coat of TileLab® or Aqua Mix® sealer will be necessary to keep sealer at peak performance.

Filing System
Additional product information is available from the manufacturer upon request.

Expected Wear
EXPECTED WEAR UP TO 15 YEARS

  • Will vary depending on hardness and texture of surface, type of area, surface wear, frequency, and type of maintenance products used
  • Weather conditions, harsh cleaning methods, and high-alkaline, acidic, or solvent-based cleaners will affect wear

Handling & Storage

  • Close container tightly after each use.
  • Store in original container only.
  • Store and use between temperatures of 40° F 90°F (4° C 32°C).
  • Dispose of residue or any unused leftover product in accordance with applicable federal, state, and local requirements.

Coverage

Size: 1 Gallon (3.78 L)

Min Coverage:  400 sq. ft. (37 M²)

Max Coverage: 1,500 sq. ft. (140 M²)