Sikatile 015 NPP (Non Porous Primer)
ECO SYSTEMS ECO PREP N PRIME is a unique, solvent free, flexible primer specifically designed with enhanced adhesion properties for use onto metallic, smooth, dense and non-porous surfaces. ECO PREP N PRIME is a safe alternative to hazardous solvent-based primers and etching products, to enable and improve the adhesion of a wide range of coatings, waterproofing membranes and tile adhesives over non-absorbent surfaces.
RECOMMENDEDATIONS:
- Priming over galvanised iron, zincalume, stainless steel, copper, brass and most metals
- Priming over glazed tiles to enable re-tiling without etching or grinding
- Priming over vinyl tiles and laminates
- Priming over acrylic and oil-based painted surfaces
- Priming over dense concrete
- Priming over PVC and rigid plastics
- Priming over epoxy coatings
- Priming general non-porous and shiny surfaces.
FEATURES:
- Fast drying and flexible
- No mixing single component
- No wastage
- Solvent free, non flammable and non hazardous
- Suitable for internal and external applications
- Easy application with a brush or roller
- Cures to a keyed finish
- Excellent alternative to mechanical grinding and acid etching surfaces
APPLICATION:
ECO SYSTEMS ECO PREP N PRIME should be stirred before use. ECO PREP N PRIME may be applied to vertical, horizontal and overhead surfaces using a roller, brush or airless spray. When using over existing cut back carpet and vinyl adhesive surfaces, it is recommended a sample test be done to ensure adequate adhesion.
DRYING:
- Tack free - allow 15 minutes at 21oC
- Dry film - allow 45 minutes at 21oC.
NOTE : Drying times will be dependent on ambient temperature, surface porosity and relative humidity
COVERAGE:
- 1 litre of ECO SYSTEMSTM ECO PREP N PRIME will cover approximately 12m2
- Coverage may vary depending on surface porosity. A minimum dry film thickness of 0.25mm must be achieved.
LIMITATIONS:
- ECO SYSTEMSTM ECO PREP N PRIME is not suitable for solvent based finishes
- Do not use externally or on shower recess floors unless the area has appropriate falls to waste for drainage
- ECO SYSTEMSTM ECO PREP N PRIME is not suitable for continuous water immersion applications, eg : swimming pools and spas etc
- ECO SYSTEMSTM ECO PREP N PRIME is not suitable over waterproofing membranes unless it is a CTATM approved product
- ECO SYSTEMSTM ECO PREP N PRIME is not suitable for polyurethane membranes
- Do not apply onto wet or damp substrates
- Do not dilute. Product comes ready to use
- Do not use as a waterproofing membrane or on areas of negative hydrostatic pressure
- Do not apply in temperatures below 5oC and above 35oC and under hot and windy conditions
SKU | CTA-PNPM |
Brand | CTA |
Shipping Weight | 0.0111kg |
Calculate Shipping
Be The First To Review This Product!
Help other Tilers Online users shop smarter by writing reviews for products you have purchased.